Square D X Series 15-Amp Single Pole Occupancy Sensor Light Switch Matte Black


 

Square D X Series 15-Amp Single Pole Occupancy Sensor Light Switch Matte Black

BRAND: Square D


The Square D X Series 15 Amp Single Pole PIR Occupancy Sensor Light Control Back Wires Black provides 180° occupancy sensing up to 1,200 sq. ft. to make saving energy automated and easy. When movement is not detected, and the sensor times out, any movement within the next 30-seconds will turn the lights back ON. However, a Independent light sensor will not turn on lights if ambient light in room is sufficient. Complete the look with 1 of the Square D X Series cover plates (not provided) that easily snaps into place for a modern, flush-facing finish to your walls. And enjoy a consistent look in your room or home with the full line of Square D X Series switches, dimmers, sensors and receptacles.

FEATURES:

180° field-of-view from PIR sensor detects movement up to 1,200 sq. ft.
Switching between occupancy detection (lights on/off are fully controlled) and vacancy detection (lights manual on and auto-off)
Independent light sensor will not turn on lights if ambient light in room is sufficient
Light timing can be independently set in increments of 10-minutes, 20-minutes, or 30-minutes
Push button provides manual on/off light switching at any time
Supports single-pole and 3-way wiring scenarios for flexible installation
Rear color-coded wires make for quick connection to electrical system
Neutral wire is required for operation
RoHS compliant



 ------------------------------



The top 20 tools commonly used by general contractors can vary depending on the specific tasks and projects they undertake. Here are some common tools:


Hammer: A versatile tool for driving nails and performing various construction tasks.

Screwdriver Set: Used for tightening or loosening screws and fasteners.

Power Drill: Enables drilling holes and driving screws more efficiently.

Circular Saw: Ideal for making straight cuts in various materials like wood, plywood, or drywall.

Tape Measure: Essential for measuring distances accurately.

Level: Helps ensure that surfaces, structures, and fixtures are correctly aligned.

Chisel Set: Used for cutting and shaping wood, removing excess materials, or creating notches.

Utility Knife: Useful for cutting materials like drywall, insulation, or roofing.

Pry Bar: Enables the removal of nails, trim, or other materials.

Pliers: Versatile tools for gripping, twisting, and cutting wires or fasteners.

Adjustable Wrench: Useful for turning bolts and nuts of different sizes.

Nail Gun: Speeds up the process of driving nails and is commonly used in framing or carpentry.

Air Compressor: Powers pneumatic tools such as nail guns, spray guns, or air-powered saws.

Paint Sprayer: Makes painting large surfaces more efficient and delivers a smooth finish.

Measuring Wheel: Useful for measuring longer distances, such as for estimating materials or mapping out areas.

Ladder: Essential for reaching elevated areas and working at heights safely.

Wet/Dry Vacuum: Helps clean up debris, dust, or water from construction sites.

Safety Equipment: Includes hard hats, safety glasses, gloves, and ear protection for personal safety.

Scaffolding: Provides a stable and elevated working platform for construction tasks at heights.

Tool Belt or Tool Bag: Allows for easy organization and access to frequently used hand tools.

Comments

Popular posts from this blog

Performax® 8-Volt Cordless 1/4" Multi-Pivot Driver Kit

Energizer® Recharge® Universal Rechargeable 9V Battery

Tool Shop® Screw Extractor Set - 5 Piece